China Professional Wide Angle Lemon Tube Driveline Transmission Agricultural Farm Tractor Cardan Universal Joint Pto Shaft for Tractor Implement

Product Description

Wide Angle Lemon Tube Driveline Transmission Agricultural Farm Tractor Cardan Universal Joint Pto Shaft for Tractor Implement

Power Take Off Shafts for all applications

A power take-off or power takeoff (PTO) is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machines.

Most commonly, it is a splined drive shaft installed on a tractor or truck allowing implements with mating fittings to be powered directly by the engine.

Semi-permanently mounted power take-offs can also be found on industrial and marine engines. These applications typically use a drive shaft and bolted joint to transmit power to a secondary implement or accessory. In the case of a marine application, such shafts may be used to power fire pumps.

We offer high-quality PTO shaft parts and accessories, including clutches, tubes, and yokes for your tractor and implements, including an extensive range of pto driveline. Request our pto shaft products at the best rate possible.

What does a power take off do?

Power take-off (PTO) is a device that transfers an engine’s mechanical power to another piece of equipment. A PTO allows the hosting energy source to transmit power to additional equipment that does not have its own engine or motor. For example, a PTO helps to run a jackhammer using a tractor engine.

What’s the difference between 540 and 1000 PTO?

When a PTO shaft is turning 540, the ratio must be adjusted (geared up or down) to meet the needs of the implement, which is usually higher RPM’s than that. Since 1000 RPM’s is almost double that of 540, there is less “”Gearing Up”” designed in the implement to do the job required.”

If you are looking for a PTO speed reducer visit here 

Function Power transmission                                   
Use Tractors and various farm implements
Place of Origin HangZhou ,ZHangZhoug, China (Mainland)
Brand Name EPT
Yoke Type push pin/quick release/collar/double push pin/bolt pins/split pins 
Processing Of Yoke Forging
Plastic Cover YW;BW;YS;BS
Color Yellow;black
Series T series; L series; S series
Tube Type Trianglar/star/lemon
Processing Of Tube Cold drawn
Spline Type 1 3/8″ Z6; 1 3/8 Z21 ;1 3/4 Z20;1 1/8 Z6; 1 3/4 Z6; 

Related Products

Application:

Company information:

 

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 38/Piece
1 Piece(Min.Order)

|
Request Sample

pto shaft

How do PTO shafts ensure efficient power transfer while maintaining safety?

PTO (Power Take-Off) shafts play a crucial role in ensuring efficient power transfer from a power source to driven machinery or equipment, while also maintaining safety. These shafts are designed with various features and mechanisms to optimize power transmission efficiency and mitigate potential hazards. Here’s a detailed explanation of how PTO shafts achieve efficient power transfer while prioritizing safety:

1. Mechanical Power Transmission: PTO shafts serve as mechanical linkages between the power source, typically a tractor or engine, and the driven machinery. They transmit rotational power from the power source to the equipment, enabling efficient transfer of energy. The mechanical design of PTO shafts, including their diameter, length, and material composition, is optimized to minimize power losses during transmission, ensuring that a significant portion of the power generated by the source is effectively delivered to the machinery.

2. Universal Joints and Flexible Couplings: PTO shafts are equipped with universal joints and flexible couplings that allow for angular misalignment and flexibility in movement. Universal joints accommodate variations in the alignment between the power source and the driven machinery, enabling smooth power transfer even when the two components are not perfectly aligned. Flexible couplings help to compensate for slight misalignments, reduce vibration, and prevent excessive stress on the shaft and connected components, thereby enhancing efficiency and reducing the risk of mechanical failure or damage.

3. Constant Velocity (CV) Joints: CV joints are often used in PTO shafts to maintain constant speed and torque transfer, particularly in applications where the driven machinery requires flexibility or operates at different angles. CV joints allow for smooth power transmission without significant fluctuations, even when the driven machinery is at an angle relative to the power source. By minimizing speed variations and power loss due to changing angles, CV joints contribute to efficient power transfer while ensuring consistent performance and reducing the likelihood of mechanical stress or premature wear.

4. Safety Guards and Shields: Safety is a paramount consideration in the design of PTO shafts. Protective guards and shields are installed to cover the rotating shaft and other moving parts. These guards act as physical barriers to prevent accidental contact with the rotating components, significantly reducing the risk of entanglement, injury, or damage. Safety guards are typically made of durable materials such as metal or plastic and are designed to allow the necessary movement for power transmission while providing adequate protection. Regular inspection and maintenance of these guards are crucial to ensure their effectiveness in maintaining safety.

5. Shear Bolt or Slip Clutch Mechanisms: PTO shafts often incorporate shear bolt or slip clutch mechanisms as safety features to protect the driveline components and prevent damage in case of excessive torque or sudden resistance. Shear bolts are designed to shear or break when the torque exceeds a predetermined threshold, disconnecting the PTO shaft from the power source. This helps prevent damage to the shaft, driven machinery, and power source. Slip clutches work similarly by allowing the PTO shaft to slip when excessive resistance is encountered, protecting the components from overload. These mechanisms act as safety measures to maintain the integrity of the PTO shaft and associated equipment while minimizing the risk of mechanical failures or accidents.

6. Compliance with Safety Standards: PTO shafts are designed and manufactured to comply with relevant safety standards and regulations. Manufacturers follow guidelines and requirements set by organizations such as the American Society of Agricultural and Biological Engineers (ASABE) or other regional safety authorities. Compliance with these standards ensures that PTO shafts meet specific safety criteria, including torque capacity, guard design, and other safety considerations. Users can rely on standardized PTO shafts that have undergone testing and certification, providing an additional layer of assurance regarding their safety and performance.

7. Operator Education and Training: To ensure safe and efficient operation, it is essential for operators to receive proper education and training on PTO shafts. Operators should be familiar with the specific safety features, maintenance requirements, and safe operating procedures for the PTO shafts used in their applications. This includes understanding the importance of using appropriate personal protective equipment, regularly inspecting the equipment for wear or damage, and following recommended maintenance schedules. Operator awareness and adherence to safety protocols significantly contribute to maintaining a safe working environment and maximizing the efficiency of power transfer.

In summary, PTO shafts ensure efficient power transfer while maintaining safety through their mechanical design, incorporation of universal joints and CV joints, installation of safety guards and shields, implementation of shear bolt or slip clutch mechanisms, compliance with safety standards, and operator education. By combining these features and practices, PTO shafts provide reliable and secure power transmission, minimizing power losses and potential risks associated with their operation.

pto shaft

Can you provide real-world examples of equipment that use PTO shafts?

Power Take-Off (PTO) shafts are extensively used in various industries, particularly in agriculture and construction. They provide a reliable power source for a wide range of equipment, enabling efficient operation and increased productivity. Here are some real-world examples of equipment that commonly use PTO shafts:

1. Agricultural Machinery:

  • Tractor Implements: A wide array of tractor-mounted implements rely on PTO shafts for power transfer. These include:
    • Mowers and rotary cutters
    • Balers and hay equipment
    • Tillers and cultivators
    • Seeders and planters
    • Sprayers
    • Manure spreaders
    • Harvesters, such as combine harvesters and forage harvesters
  • Stationary Equipment: PTO shafts are also used in stationary agricultural equipment, including:
    • Feed grinders and mixers
    • Silo unloaders
    • Grain augers and elevators
    • Irrigation pumps
    • Wood chippers and shredders
    • Stump grinders

2. Construction and Earthmoving Equipment:

  • Backhoes and Excavators: PTO shafts can be found in backhoes and excavators, powering attachments such as augers, hydraulic hammers, and brush cutters.
  • Post Hole Diggers: Post hole diggers used for fence installation often rely on PTO shafts to transfer power to the digging mechanism.
  • Trenchers: Trenching machines equipped with PTO shafts efficiently dig trenches for utility installations, drainage systems, or irrigation lines.
  • Stump Grinders: Stump grinders used in land clearing and tree removal operations often utilize PTO shafts to power their cutting blades.
  • Soil Stabilizers and Road Reclaimers: These machines use PTO shafts to drive the rotor and milling drums, which pulverize and mix materials for road construction and maintenance.

3. Forestry Equipment:

  • Wood Chippers: Wood chippers used for processing tree branches and logs into wood chips are commonly powered by PTO shafts.
  • Brush Cutters and Mulchers: PTO-driven brush cutters and mulchers are employed to clear vegetation and maintain forested areas.
  • Log Splitters: Log splitters that split logs into firewood often utilize PTO shafts to power the splitting mechanism.

4. Utility Equipment:

  • Generators: Some generators are designed to be driven by PTO shafts, providing an auxiliary power source for various applications in remote locations or during power outages.
  • Pumps: PTO-driven pumps are commonly used for agricultural irrigation, water transfer, and dewatering applications.

5. Specialty Equipment:

  • Ice Resurfacers: PTO shafts are employed in ice resurfacing machines used in ice rinks to maintain a smooth ice surface for ice hockey and figure skating.
  • Air Compressors: Some air compressors are driven by PTO shafts, providing a source of compressed air for various applications.

These examples represent a range of equipment that extensively relies on PTO shafts for power transfer. PTO shafts enable the efficient operation of these machines, increasing productivity and versatility across various industries.

pto shaft

How do PTO shafts handle variations in speed and torque requirements?

PTO shafts (Power Take-Off shafts) are designed to handle variations in speed and torque requirements between the power source (such as a tractor or engine) and the driven machinery or equipment. They incorporate various mechanisms and components to ensure efficient power transmission while accommodating the different speed and torque demands. Here’s a detailed explanation of how PTO shafts handle variations in speed and torque requirements:

1. Gearbox Systems: PTO shafts often incorporate gearbox systems to match the speed and torque requirements between the power source and the driven machinery. Gearboxes allow for speed reduction or increase and can also change the rotational direction if necessary. By using different gear ratios, PTO shafts can adapt the rotational speed and torque output to suit the specific requirements of the driven equipment. Gearbox systems enable PTO shafts to provide the necessary power and speed compatibility between the power source and the machinery they drive.

2. Shear Bolt Mechanisms: Some PTO shafts, particularly in applications where sudden overloads or shock loads are expected, use shear bolt mechanisms. These mechanisms are designed to protect the driveline components from damage by disconnecting the PTO shaft in case of excessive torque or sudden resistance. Shear bolts are designed to break at a specific torque threshold, ensuring that the PTO shaft separates before the driveline components suffer damage. By incorporating shear bolt mechanisms, PTO shafts can handle variations in torque requirements and provide a safety feature to protect the equipment.

3. Friction Clutches: PTO shafts may incorporate friction clutch systems to enable smooth engagement and disengagement of power transfer. Friction clutches use a disc and pressure plate mechanism to control the transmission of power. Operators can gradually engage or disengage the power transfer by adjusting the pressure on the friction disc. This feature allows for precise control over torque transmission, accommodating variations in torque requirements while minimizing shock loads on the driveline components. Friction clutches are commonly used in applications where smooth power engagement is essential, such as in hydraulic pumps, generators, and industrial mixers.

4. Constant Velocity (CV) Joints: In cases where the driven machinery requires a significant range of movement or articulation, PTO shafts may incorporate Constant Velocity (CV) joints. CV joints allow the PTO shaft to accommodate misalignment and angular variations without affecting power transmission. These joints provide a smooth and constant power transfer even when the driven machinery is at an angle relative to the power source. CV joints are commonly used in applications such as articulated loaders, telescopic handlers, and self-propelled sprayers, where the machinery requires flexibility and a wide range of movement.

5. Telescopic Designs: Some PTO shafts feature telescopic designs that allow for length adjustment. These shafts consist of two or more concentric shafts that slide within each other, providing the ability to extend or retract the PTO shaft as needed. Telescopic designs accommodate variations in the distance between the power source and the driven machinery. By adjusting the length of the PTO shaft, operators can ensure proper power transmission without the risk of the shaft dragging on the ground or being too short to reach the equipment. Telescopic PTO shafts are commonly used in applications where the distance between the power source and the implement varies, such as in front-mounted implements, snow blowers, and self-loading wagons.

By incorporating these mechanisms and designs, PTO shafts can handle variations in speed and torque requirements effectively. They provide the necessary flexibility, safety, and control to ensure efficient power transmission between the power source and the driven machinery. PTO shafts play a critical role in adapting power to meet the specific needs of various equipment and applications.

China Professional Wide Angle Lemon Tube Driveline Transmission Agricultural Farm Tractor Cardan Universal Joint Pto Shaft for Tractor Implement  China Professional Wide Angle Lemon Tube Driveline Transmission Agricultural Farm Tractor Cardan Universal Joint Pto Shaft for Tractor Implement
editor by CX 2023-10-02

Product tags

150hp tractor,farming tractor wheel,tractor,tractor 150hp,tractor diesel,tractor plough,tractor pto,tractor tractor tractor,tractor tractor tractor tractor,tractor wheel adaptor shaft,agricultural shaft,pto shaft,shaft,shaft pto shaft agricultural chain,chain,chain transmission,steel chain,transmission chain agricultural grinder,stump grinder tractor,tractor,tractor hitch,tractor pto,tractor pto stump grinder,tractor stump grinder,tractor tractor tractor,tractor tractor tractor tractor agriculture,agriculture farm tractor,agriculture tractor farm,farm tractor,tractor,tractor agriculture,tractor farm,tractor for,tractor tractor tractor,tractor tractor tractor tractor,tube tractor agriculture,potato tractor,tractor,tractor agriculture,tractor pto,tractor pto driven,tractor tractor tractor,tractor tractor tractor tractor agriculture,pto tractors,tractors used,used agriculture,used tractors tractors auto shaft,cnc shaft,precision shaft,shaft,shaft cnc,supplier shaft bearing,bearing china,bearing for roller,bearing roller bearing,china bearing bearing,tapered roller bearing boat motor outboard,boat with motor,boat with outboard motor,kit motor,motor,motor boat,motor kit,motor motor,motor outboard,outboard boat motor,outboard motor,outboard motor outboard cardan joint,cardan shaft,cardan shaft coupling,coupling,coupling shaft,joint shaft,shaft,shaft coupling,universal coupling,universal joint,universal shaft,yoke shaft car shaft,cardan joint,cardan shaft,joint shaft,pto shaft,shaft,shaft pto shaft,universal joint,universal pto shaft,universal shaft ce tractor,grass mower tractor,grass tractor,mower tractor,tractor,tractor driven mower,tractor mower,tractor pto,tractor pto driven,tractor tractor tractor,tractor tractor tractor tractor ce tractor,mower tractor,tractor,tractor mower,tractor pto,tractor tractor tractor,tractor tractor tractor tractor clutch shaft,machinery,machinery machinery,pto shaft,pto shaft clutch,shaft,shaft pto shaft,shaft wood,wood machinery,wood shaft cnc machining parts,machining cnc,turning machining corn tractor,tractor,tractor pto,tractor tractor tractor,tractor tractor tractor tractor coupling,coupling shaft,flange coupling,flange shaft coupling,pto shaft,shaft,shaft coupling,shaft coupling flange,shaft flange,shaft pto shaft,universal coupling,universal pto shaft,universal shaft coupling,sleeve coupling cylinder engine,engine cylinder,single cylinder,single cylinder engine,small cylinder drilling machine tractor,machine,machine drilling,machine tractor,tractor,tractor pto,tractor pto drilling machine,tractor pto driven,tractor tractor tractor,tractor tractor tractor tractor eaton hydraulic,eaton hydraulic pump,eaton vickers hydraulic pump,hydraulic,hydraulic pto pump,hydraulic pump,hydraulic pump pump,pto hydraulic,pto hydraulic pump farm tractor,potato tractor,tractor,tractor farm,tractor pto,tractor pto driven,tractor single,tractor tractor tractor,tractor tractor tractor tractor gear,gear gearbox,gear shaft,gearbox,gearbox gear,gearbox shaft,gearbox with,pto gearbox,pto shaft,shaft,shaft gear,shaft pto shaft gear,gear rotary,rotary gear,transmission gear gearbox,gearbox shaft,pto gearbox,pto shaft,rotary shaft,rotary tiller gearbox,shaft,shaft pto shaft,tiller gearbox gears,gears gears gears heavy duty pulley,pulley,pulley pulley hole digger tractor,tractor,tractor auger,tractor digger,tractor pto,tractor pto driven,tractor rotary,tractor tractor tractor,tractor tractor tractor tractor hydraulic,hydraulic parts,hydraulic pto pump,hydraulic pump,hydraulic pump parts,hydraulic pump pump,hydraulic truck,parts hydraulic,pto hydraulic,pto hydraulic pump,pto parts machine machine,machine peeling,machine shaft,peeling machine,pto shaft,pto shaft series,shaft,shaft pto shaft,threshing machine machine,machine shaft,pto shaft,saw shaft,shaft,shaft pto shaft mower pto shaft,pto shaft,pto shaft series,shaft,shaft pto shaft mower pto shaft,pto shaft,shaft,shaft pto shaft pto parts shaft,transmission shaft tractor,tractor mounted trencher,tractor pto,tractor pto driven,tractor tractor tractor,tractor tractor tractor tractor,tractor trencher,tractor trencher mounted tractor,tractor pto,tractor tractor tractor,tractor tractor tractor tractor