S45c Hard Chrome Plated Steel Bar

SKU: 9f133ec1d776 Category:


Organization overview

HangJCPT Weipeng JCPT JCPT Co., Ltd. is located in HangJCPT, which is a foreign trade oriented economic produced town, adjacent to intercontinental port metropolis ZheJiang . Recognized in 2009, we are a manufacturing business specialized in the creation of piston rods and linear shafts.

     Quality  is  Life  of  JCPT. Your  Satisfaction  is  Our  Goal.       
Major Products:

We offer the makers of hydraulic and pneumatic cylinders a broad assortment of higher high quality tube and piston products.

Tough Chrome Plated Rod, JCPT Piston Rod, Cylinder Piston Rod, Chromium Rods, Challenging Chrome Shaft, Induction Rod, Induction Shaft, and so forth.

Content: JIS S45C, SAE1045, DIN CK45

The tough chromium piston rods produced by our organization occur with much more than JIS S45C materials, in which the rods 1st go through precision milling and processing, and are then put through gard floor chromium treatment, permitting a floor precision level of f7, and a area hardness achieving HV800 minimal and up, which not only assist to boost wear resistance but also support to prolong the existence cycle of the rods, as a result assisting the JCPTer conserve value.

The corrosion resistances is examined in our very own inside salt spray laboratory, and The rods surface area heat treatment method and hardness achieving HRC55°±2°, and at a hardened depth of in between .5mm – 3mm, just before the rods are set by means of precision milling and difficult chromium treatment method for a membrane thickness measuring 20 micron ± ten% to drastically increase the rod’s put on resistance, and help to increase the life cycle of the rods.

Firm Capacity

Our major merchandise requirements are composed under for your reference.  If any curiosity, pls feel cost-free to make contact with us.

 Item Hard Chrome Plated Rod Induction Hard Chrome Rod
 Place of JCPT  ZheJiang , China   ZheJiang , China
 Material   JIS S45C, SAE1045, DIN CK45  JIS S45C, SAE1045, DIN CK45
 Length  1000-6000mm  1000-6000mm 
 Shaft Diameter  3-120mm   3-120mm
 Surface Hardness  without hardened or hardened  HRC58-sixty
 Chrome Layer Hardness  above HV800  above HV800
 Chrome Layer Thickness  15μm ~ 25μm ( Tailored)   15μm ~ 25μm ( Custom-made)
 Surface Hardning Depth  /  0.8-3mm
 Axis Straightness  0.15mm /1000mm  0.15mm /1000mm
 Roughness  Ra .2μm~.4μm  Ra .2μm~.6μm
 JCPT  G6/F7  G6/F7

Chrome Plated Steel Bars:

Our Chrome Plated Bars are produced from medium carbon chilly-concluded or sizzling rolled steel bars generally in 1045 grades. The bars are centerless ground, polished, and chrome plated to a least thickness of .0005″, and .001″ per aspect. 
Chrome Plated bars are specifically created to be utilized for most piston rod applications in hydraulic and pneumatic cylinders.

Induction Hardened Chrome Plated Bars:

Our  Induction Hardened Chrome Plated Bars are produced by utilizing superior processing strategies normally on JIS S45C, SAE1045 or DIN CK45 steel rods, for floor removal, sprucing, induction hardening, followed by tough chrome plating to a thickness least of .0005″ or .001″ for each aspect. The concluded merchandise outcomes in a exceptional influence resistant bar perfect for high top quality piston rods capable of dealing with challenging environments.


Linear Motion Xihu (West Lake) Dis.s, JCPT cylinder rods
plastic injection molding equipment, development tools, rubber molding devices, papermaJCPTs, printing equipment, refrigeration tools, foods and chemical machinery, loading tools, fiber spinning products, textile machinery, agricultural equipment, automotives, shipbuilding and the like.


 Item   Honed Tube
 Raw Material  DIN ST52, SAE1571
 Pressure & Temperatur Classification  High pressure & temperature piping
 Inner Diameter  40mm-320mm
 Outer Diameter  50-400mm
 Thickness  5-40mm
  Length  7000mm
 Straightness  Max 0.5/1000mm
  Inside Surface Roughness(Ra)  0.2-.4um
 Tolerance INT  DIN2391 H8

Chilly Drawn Seamless Mechanical Tubing (CDS)

is a cold drawn 1571 metal tube. Produced from piercing sizzling rolled bar inventory, the cold drawing method boosts the tube’s bodily qualities minimizing the value of machine time. Cold drawn seamless tubing provides a much better uniformed OD and ID, increased machinability, improved strength, and tighter tolerances when compared to hot complete seamless items


JCPT cylinders
Truck and JCPTmotive components
JCPT equipment
Agricultural elements
JCPT and Truck Axles, Suspension parts and shock absorbers
Large Velocity Shafts and rollers
JCPTs and Spacers, Roll cages, and many other machined tubular areas.

The raw content we use is the most popular model in China, which has extremely higher density and stability in the good quality. Our products are hightly appreciated by our customers for their competitive cost and very good good quality.

Wish You a Satisfied New Year.

If you are intrigued in our firm, please truly feel free of charge to speak to us:

Add: No.ninety eight HangJCPTang Highway, Nationwide JCPT District, 215571, HangJCPT, P.R.C
Tel: -512-68387269 
Fax: -512-68387269

S45c Hard Chrome Plated Steel Bar