Solution Description
Tractor driven 3 level PTO agricultural rotary tiller wholesale
Item Description
The Rotary tiller is best for cultivating,aerating andstirring up soil for yard,food plots and other tillage demands.
Rotocultivator Functions on 25-160HP Tractors.
one) Forged Blades:keeping a sharp slicing edge and maximizing the overall performance of the rotavator.They are manufactured of particular material, with more than times heat treatment method procedure to ensure wonderful working functionality.
2) Rotary Tiller Oil bath iubrication with all gear-driven driveline.
3) The Rotary Tiller suspension plate form is manufactured by laser slicing,molding place.
4) Self-sharpening warmth-taken care of tines.
5) Labels are:water proof, damp proof, CZPT proof, anti-ultraviolet radiation.
six)Adjustable runners for operating depths from 1 in.to 7 in.
seven) Come with large-duty PTO shaft and slip clutch.
Parameters of Rotary Tiller |
Versions | 1GQN-80 | 1GQN-a hundred | 1GQN-a hundred twenty five | 1GQN-140 | 1GQN-one hundred fifty | 1GQN-a hundred and eighty | 1GQN-two hundred | 1GQN-250 | 1GQN-300 | 1GQN-350 | 1GQN-400 |
Matched power (hp) | fifteen-20 | 18-22 | twenty-25 | 25-thirty | 25-30 | fifty-60 | 55-75 | seventy five-eighty | 90-one hundred twenty | one hundred twenty five-150 | a hundred and forty-a hundred and sixty |
Working width (mm) | seven hundred | 900 | 1200 | 1300 | 1400 | 1650 | 1850 | 2350 | 2850 | 3350 | 3850 |
Working depth (cm) | 10-18 | ten-18 | 10-18 | 10-18 | 10-eighteen | twelve-twenty | 12-20 | twelve-twenty | twelve-20 | 12-twenty | 12-20 |
No. of knife (pcs) | 18 | 22 | 26 | 30 | 34 | forty two | forty six | fifty eight | 70 | eighty two | ninety four |
Type of knife | IT225 | IT245 | |||||||||
Total weight(kg) | one hundred seventy five | 180 | 190 | two hundred | 210 | 350 | 380 | 400 | 600 | 870 | 940 |
Linkage | 3-pointed mounted |
Our Positive aspects
Any quality problem you have in 1 year, we assure to support you solve asap.
Each and every customer to us is distinctive, best support will give you.
We supply you our machine with great substance and assure not to deduct the material.
- Transmission: chain driven.
- Gearbox is made of casting iron. Material performance is better. Not easy broken.
- The suspension plate shape is not easy to deform.
- Chain device hand adjustable. More easy and reliable.
- Side protection plates are added onto the rear deflection. This device prevents the soil flying out.
- The tilling height can be adjustable.
- The structure is firm and stable.
- 3 point PTO shaft CZPT Cultivator Rotary Tiller
Business Profile
Recognized in 2000 yr, ZheJiang Financial institution Invenstment Agriculture Improvement Pvt. Ltd. (BIA) is a globally renowned company of Farm Tools underneath the brand name identify BIA. Synonymous with high quality and toughness, BIA is a brand name of decision amongst farmers in CHINA and a hundred other international locations. Company`s varied selection of goods include Tractor, Electricity Tiller, Seeder equipments, Sprapers, Tillage Implements ( Disc harrow, Disc plow, Rotary tiller, Cultivator, Furrow plough Ditching ridger, Scraper, Gap digger) and many others. Marked by 20 many years of encounter, we have been contributing to agricultural progress by offering innovative implements at the most inexpensive rates.
With our pursuit to perfection in all the spheres of the enterprise, we have created a powerful presence in domestic as effectively as abroad marketplace. Our point out-of-the-art producing units are geared up with innovative equipment able of executing bulk orders with precision. We use ideal good quality of raw substance and sustainable engineering designs for production innovative implements of Intercontinental expectations. Our firm has been qualified with ISO 9001: 2008 for subsequent a entire world-class good quality management method.
Packaging & Shipping and delivery
FAQ
Q1. How to acquire CHINABIA merchandise in Manufactured-in-China.com?
Inquiry——— Quotation ——–Price sensible ——-Examine with specification —–Proforma Invoice ————Payment made ——- Making the items ——-Examining High quality———–Item cargo ———– Buyer affirm———– Right after-product sales provider
Q2.How prolonged is the shipping and delivery date?
A:In common, we can ship the merchandise within 20-30 days right after obtaining your payment. Of system, it also depends on your quantity.
Q3. How can I get to your manufacturing unit?
A:We are located in ZheJiang , You can fly to HangZhou/HangZhou Airport , Around the HangZhou Port . the transportation is very practical
Q4.Do you have inventory for all objects?
A:In standard, we have some inventory, while if you require a bulk get, we even now want time to make it. Of course, we will inform all information you just before your payment.
Q5: What’s your main items?
A: Our items are protected virtually all farm equipment , we can fulfill your any requires.
Q6. What is your terms of payment?
A: T/T, L/C, Paypal,Western Union
Q7. How about the Guarantee?
fifteen months guarantee from the time of the items arrive at spot.
Q8. Could we get 1 sample?
Sure, of training course, maybe you ought to you payment, then you begin the mass buy, we will return to you.
US $470-1,285 / Piece | |
1 Piece (Min. Order) |
###
Type: | Rotary Tiller |
---|---|
Application Field: | Agriculture |
Farming Policy: | Dry Cultivating Machinery |
Power Source: | Tractor |
Operation: | Soil Preparation Machinery, Continuous Running Operation |
Traction Type: | Hanging |
###
Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Parameters of Rotary Tiller |
###
Models | 1GQN-80 | 1GQN-100 | 1GQN-125 | 1GQN-140 | 1GQN-150 | 1GQN-180 | 1GQN-200 | 1GQN-250 | 1GQN-300 | 1GQN-350 | 1GQN-400 |
Matched power (hp) | 15-20 | 18-22 | 20-25 | 25-30 | 25-30 | 50-60 | 55-75 | 75-80 | 90-120 | 125-150 | 140-160 |
Working width (mm) | 700 | 900 | 1200 | 1300 | 1400 | 1650 | 1850 | 2350 | 2850 | 3350 | 3850 |
Working depth (cm) | 10-18 | 10-18 | 10-18 | 10-18 | 10-18 | 12-20 | 12-20 | 12-20 | 12-20 | 12-20 | 12-20 |
No. of knife (pcs) | 18 | 22 | 26 | 30 | 34 | 42 | 46 | 58 | 70 | 82 | 94 |
Type of knife | IT225 | IT245 | |||||||||
Total weight(kg) | 175 | 180 | 190 | 200 | 210 | 350 | 380 | 400 | 600 | 870 | 940 |
Linkage | Three-pointed mounted |
US $470-1,285 / Piece | |
1 Piece (Min. Order) |
###
Type: | Rotary Tiller |
---|---|
Application Field: | Agriculture |
Farming Policy: | Dry Cultivating Machinery |
Power Source: | Tractor |
Operation: | Soil Preparation Machinery, Continuous Running Operation |
Traction Type: | Hanging |
###
Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Parameters of Rotary Tiller |
###
Models | 1GQN-80 | 1GQN-100 | 1GQN-125 | 1GQN-140 | 1GQN-150 | 1GQN-180 | 1GQN-200 | 1GQN-250 | 1GQN-300 | 1GQN-350 | 1GQN-400 |
Matched power (hp) | 15-20 | 18-22 | 20-25 | 25-30 | 25-30 | 50-60 | 55-75 | 75-80 | 90-120 | 125-150 | 140-160 |
Working width (mm) | 700 | 900 | 1200 | 1300 | 1400 | 1650 | 1850 | 2350 | 2850 | 3350 | 3850 |
Working depth (cm) | 10-18 | 10-18 | 10-18 | 10-18 | 10-18 | 12-20 | 12-20 | 12-20 | 12-20 | 12-20 | 12-20 |
No. of knife (pcs) | 18 | 22 | 26 | 30 | 34 | 42 | 46 | 58 | 70 | 82 | 94 |
Type of knife | IT225 | IT245 | |||||||||
Total weight(kg) | 175 | 180 | 190 | 200 | 210 | 350 | 380 | 400 | 600 | 870 | 940 |
Linkage | Three-pointed mounted |
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by czh 2023-01-01